Application instructions
Arrange for ventilation and use mask and gloves
 |
CleaningClean the worktop carefully with Trip Trap Wood Cleaner mixed with water 1:40. If necessary, sand with sandpaper grain 120. |
 |
Stir and applyStir the Worktop Oil carefully before use. When using Worktop Oil, white it is important to stir regularly during application to avoid the pigment to precipitate.Apply the oil with a paintbrush, paint roller or scrubber in a even coat. |
 |
Sand if necessaryIf necessary, sand with wet grinding paper in the wet oil lengthwise of the wood grains.Wait for 20-30 minutes while the oil is penetrating into the wood. |
 |
Remove excess oilAfter max. 30 minutes all excess oil is to be removed with cotton cloths. Reapplication of oil may be necessary in connection with open structured wood. |
 |
HardeningAfter approx. 24 hours at 20°C the oil has hardened.Do not expose oiled surfaces to water within that time. |
 |
Oil-saturated cloths can spontaneously combustOil-saturated cloths can spontaneously combust and must therefore be burned, placed in water or kept in a lid-sealed metal container. |
